Basic Keelboat Sailing Standard (101)
Prerequisites: None
General Description: Sailors must sail a boat of about 20 feet
in length in light to moderate winds and sea conditions in familiar
waters without supervision. A preparatory Standard with no auxiliary
power or navigation skills required. Successful candidates earn a
National Safe Boating Certificate approved by NASBLA and the U.S. Coast
Guard.
SAILING KNOWLEDGE
A Certified Sailor has successfully demonstrated his or her ability to:
TERMINOLOGY
- Identify the following parts of a sailboat:
hull |
mast |
mainsail |
keel |
boom |
bow |
bow pulpit |
gooseneck |
jib |
traveller |
stern |
stern pulpit |
deck |
lifelines |
cabin |
spreaders |
shrouds |
|
headstay |
forestay |
backstay |
- Describe the functions of the following items on a sailboat:
mainsheet |
rudder |
tiller / wheel |
boomvang |
boom topping lift |
jib sheet(s) |
halyard(s) |
winches |
fairlead v s. padeye |
downhaul |
outhaul |
cunningham |
stays / shrouds |
shackle |
telltails |
spring / breast lines |
fenders |
cleats |
- Define the following terms:
port |
starboard |
skipper |
helmsman |
crew |
forward |
aft |
coming about |
gybing |
running rigging |
standing rigging |
heel |
ahead |
abeam |
astern |
windward |
leeward |
beam |
- Identify the following sails and parts of a sail:
mainsail |
jib |
storm jib |
spinnaker |
genoa |
hanks |
battens |
batten packets |
bolt rope |
luff |
leech |
foot |
head |
tack |
clew |
- Explain the following terms and points of sail and identify them from diagrams:
in-irons |
head to wind |
luffing |
close hauled |
close reach |
beam reach |
broad reach |
running |
starboard tack |
port tack |
windward boat |
leeward boat |
heading up |
heading down / bearing away |
sailing by the lee |
- Apply the Navigation Rules (International and Inland Navigational
Rules for prevention of collision) by means of diagrams in the
following situations and identify the sailboat or powerboat that is the
"stand-on" and "give-way" boat.
- port tack and starboard tack sailboats
- windward and leeward sailboats
- overtaking situation
- boat on the right (danger zone)
- boats meeting head-on
- Apply Rule 5 (Look-out Rule) contained in the Navigation
Rules (International and Inland Navigation Rules for prevention of
collision)
- Describe the actions to be taken when sailing in the vicinity of commercial shipping (Rule 9. Nav. Rules)
- Define hull identification number.
- Describe the differance between planing and displacement hulls.
- Describe proper means of waste disposal including penalties
for improper disposal and means for Notification of authorities in the
event of oil spillage.
- Describe how and when to file a float plan.
- Describe registration numbers and how to display them.
- Describe a capacity plate, where to find one and the information which is contained on the plate.
- Describe an alternate means of determining a boat's passenger capacity.
- State the federal standards for determining intoxication using Blood Alcohol Content (BAC).
- What is the BAC of the state in which you sail?
- Give 5 situations which may be considered negligent operation on the part of boater.
- Describe when and to whom boating accidents must be reported.
- Describe under what circumstances an operator must render assistance to another boater in danger.
- Describe the information an operator should acquire before operating his/her boat in an unfamiliar area. Local Knowledge.
- Describe where a boater would get the information in the item above.
- Be able to identify lateral aids to navigation by color, shape and numbering.
- Be able to identify Safe Water, Information and Regulatory Markers by corol, shape and numbering.
- List required safety equipment for recreational vessels between 23 and 40 feet.
- Describe procedures for safety trailing and launching a boat.
- Describe sound signals used by recreational vessels and their meanings.
- Identify the location and color of running lights used by recreational vessels.
- Describe common anchor types and anchoring procedures.
SAILING SKILLS
A Certified Sailor has successfully demonstrated his or her ability to:
GEAR AND EQUIPMENT
- Select and properly use a personal flotation device.
- Select proper clothing for sailing.
SAILING
- Hoist the basic sails, set appropriate luff tensions, and coil and hang halyards and other lines.
- Without an Instructor or direction, act as helmsman / skipper and
crew on a sailboat using proper commands and responses while sailing
away and back to a dock and mooring under various wind directions. Sail
a windward / leeward course while performing successful come about and
gybe.
Sample Commands:
"ease sheets" "easing sheets" |
"heading-up, sheet in" "sheeting in" |
"ready about" "ready" |
"helms-a-lee" "hard-alee" |
"ready to gybe" "ready" "gybe-ho" |
- Lower, fold and stow sails properly.
MAN OVERBOARD
- Describe and demonstrate the actions to be taken by a helmsman
/ skipper when sailing from the time a person falls overboard without
warning until the crew member is safely recovered.
- Speed is secondary to safety in performing this procedure.
- Describe how to get an exhausted person aboard.
- Steer a sailboat by the lee for 100 yards without gybing.
- Steer a sailboat moving backwards for 20 yards with sails backed.
- Secure a sailboat to a dock so as to ensure limited movement and set out fenders properly.
KNOTS
- Describe the function of and tie the following knots without assistance:
- bowline (in less than 20 seconds)
- figure eight (in less than 15 seconds)
- cleat hitch (in less than 15 seconds)
- Tie the following knots without assistance in less than 20 seconds:
- reef / square knot
- clove hitch
- round turn and two half hitches
Special Note for Basic Keelboat Standard Certification
The American Sailing Association's Basic Keelboat Sailing course was
recently approved by the National Association of Boating Law
Administrators (NASBLA) and the U. S. Coast Guard as a recognized Safe
Boating Course. As such, it meets all requirements for mandatory
education and licensing for every state in the United States.
The Items listed below have been added to the Basic Keelboat
Sailing Standard published in the ASA International Log Book. Please
note that these items will be taught and tested in courses which lead
to ASA Basic Keelboat Sailing Certification.
Apply the Navigation Rules (international and Inland Navigation
Rules for prevention of collision) by means of diagrams in the
following situations and identify the sailboat or powerboat that is the
"stand-on" and "give-way" boat.
- Boats meeting head-on
- Define hull identification number
- Describe the difference between planing and displacement hulls.
- Describe proper means of waste disposal including penalties
for improper disposal and means for notification of authorities in the
event of oil spillage.
- Describe how and when to file a float plan.
- Describe registration numbers and how to display them.
- Describe a capacity plate, where to find one and the information which is contained on the plate.
- Describe an alternate means of determining a boat's passenger capacity
- State the federal standards for determining intoxication using Blood Alcohol Content (BAC).
- Give 5 situations which may be considered negligent operations on the part of a boater.
- Describe when and to whom boating accidents must be reported.
- Describe under what circumstances an operator must render assistance to another boater in danger.
- Describe the information an operator should acquire before
operating his/her boat in an unfamiliar area. Describe where a boater
would get the information in the item above.
- Be able to identify by color, shape and numbering, lateral aids to navigation.
- Be able to identify by color, shape and numbering, Safe Water,
Information and Regulatory Markers List required safety equipment for
recreational vessels between 23 and 40 feet.
- Describe procedures for safely trailing and launching a boat.
- Describe sound signals used by recreational vessels and their meanings.
- Identify the location and color of running lights used by recreational vessels.
- Describe common anchor types and anchoring procedures.
|